A survey of safety separation management and collision avoidance approaches of civil UAS operating in integration national airspace system

Recent years have witnessed a booming of the industry of civil Unmanned Aircraft System (UAS). As an emerging industry, the UAS industry has been attracting great attention from governments of all countries and the aviation industry. UAS are highly digitalized, informationized, and intelligent; therefore, their integration into the national airspace system has become an important trend in the development of civil aviation. However, the complexity of UAS operation poses great challenges to the traditional aviation regulatory system and technical means. How to prevent collisions between UASs and between UAS and manned aircraft to achieve safe and efficient operation in the integrated operating airspace has become a common challenge for industry and academia around the world. In recent years, the international community has carried out a great amount of work and experiments in the air traffic management of UAS and some of the key technologies. This paper attempts to make a review of the UAS separation management and key technologies in collision avoidance in the integrated airspace, mainly focusing on the current situation of UAS Traffic Management (UTM), safety separation standards, detection system, collision risk prediction, collision avoidance, safety risk assessment, etc., as well as an analysis of the bottlenecks that the current researches encountered and their development trends, so as to provide some insights and references for further research in this regard. Finally, this paper makes a further summary of some of the research highlights and challenges.     

Calculation of the transonic dip of airfoils using viscous-inviscid aerodynamic interaction method

A numerical procedure for the calculation of the transonic dip of airfoils in the time domain is presented. A viscous-inviscid aerodynamic interaction method is taken to calculate the unsteady aerodynamic loads. In the present case the integral boundary layer equations are coupled with the Transonic Small Disturbance (TSD) Potential Equation. The coupling between structural motion and aerodynamic loads is carried out using State Space equation. It is solved by State Transition Matrix technique. Results are presented for NACA 64A010 and NLR 7301 airfoils with structural data from Isogai and DLR, respectively. Comparisons show good agreement with other numerical results. Certain deviations of experimental data taken from literature need more insight in the detailed test conditions.     

非线性四阶微分方程两点边值问题解的存在唯一性

讨论了非线性四阶微分方程y(4)=f(x,y,y',y',y')的两点边值问题解的存在唯一性。其中,函数f在[a,b]×R4上连续,且满足Lipschitz条件。     

褶皱结构成形时的形状偏差计算

解决了褶皱结构成形时相邻的平行四边形平面元素之间连接区棱的修圆半径值预测问题。把毛坯模拟成薄板，定义了平行四边形平面元素的边界条件，采用能量法导出挠度和力函数的非线性微分方程组，利用积分－差分法实现其数值解，并提供计算结果和分析应力－应变场。采用的计算方法可用于研究毛坯的刚度参数和工艺参数对褶皱结构的形状影响。     

EFFECT OF THE RIBLETS SURFACE ON THE BOUNDARY LAYER DEVELOPMENT

ＥＦＦＥＣＴ　ＯＦ　ＴＨＥ　ＲＩＢＬＥＴＳ　ＳＵＲＦＡＣＥ　ＯＮ　ＴＨＥ　ＢＯＵＮＤＡＲＹ　ＬＡＹＥＲ　ＤＥＶＥＬＯＰＭＥＮＴＷａｎｇＪｉｎｊｕｎ；ＬａｎＳｈｉｌｏｎｇ；ＬｉａｎＱｉｘｉａｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＦｌｕｉｄＭｅｃｈａｎｉｃｓＩＢｅ...     

八丝热线探针制作及其应用

介绍了八丝热线探针的制作工艺,有效地消除了各热丝探头之间的电信号干扰和动力学干扰。实验中使用该探针检测到了湍流边界层内的大尺度旋涡,并测量了它们的强度和尺度。与此同时还获得了速度、湍流强度和功率谱等流场参数,结果与现有典型数据一致。说明本文所述的多丝热线探针具有很强的实用性。     

型号设计中的安全性设计分析

通过对“长征三号”运载火箭的一些安全性设计实例帕的分析来建立安全性设计的概念，论述安全性设计在型号设计中的重要作用和地位。分析认为，安全性设计应以总体、系统设计师为主，并从设计初期抓起。     

马蹄涡结构的显示

对层流角区流动的动态流动模式进行了流动可视化实验研究.实验采用了脉冲氢泡发生器和录像系统对流场进行了显示和研究.通过实验发现,氢泡丝的布置是清晰显示角区流动的精细结构的重要因素.实验雷诺数范围为Reδ*=2.74×102～3.19×102.该实验的角区流动由在平板表面的长方形突起物产生.实验结果显示了主马蹄涡和反向二次涡的流动结构和流动过程.实验还发现了一系列新的流动现象,如马蹄涡的头部形成区域的流动过程及其在柱体上游形成"肩膀"的现象等.     

二维通道内湍流边界层分离的实验研究

用激光多普勒技术测量了二维扩压器中不可压湍流边界层分离流动，得到了时均速度和雷诺剪应力分布。实验结果分析表明：以Ｃｏｌｅｓ速度律发展的Ｂａｒｄｉｎａ速度分布可以描述瞬时间歇分离点以前和瞬时间歇再附点以后的时均速度分布，但无法描述分离区的边界层速度型。Ｃｒｏｓｓ速度分布可描述分离区的边界层速度分布。Ｃｅｂｅｃｉ＆Ｓｍｉｔｈ涡粘性代数模型难以正确地描述分离边界层的雷诺剪应力。     

子波变换在实验流体力学中的应用

介绍了子波分析的历史、基本知识以及在实验流体力学方面的应用。讨论了子波变换在客观辨识湍流边界层相干结构方面的应用。作者用子波变换的方法提出了确定湍流边界层相干结构挥发时间尺度的能量最大准则，提取了相干结构对应的速度信号波形。用于波变换研究了湍流边界层脉动速度信号的局部奇异性行为，发现相干结构发生处脉动速度信号的局部奇异性指数为负值。